PROXXON electric tools
Proxxon tools with character.
PROXXON has been producing tools for model builders and do-it-yourselfers with high demands for 30 years.
Thanks to the high-quality workmanship, home improvement dreams come true. From the PROXXON table saw KS 230 to the PROXXON MICRO milling machine MF 70 or PROXXON precision jigsaw, you will find all imaginable power devices in the best quality here. We carry all tools from Proxxon, from the PROXXON engraving set to the grinding mop cylinder 120 grit.
Also discover our Proxxon spare parts. You need, for example, saw blades, rubber backing disks, replacement cutting discs or PROXXON turnery chucks.
Belt sander BS/E
€142.99*
The PROXXON belt sander BS / E is ideal for working in hard-to-reach places.
For grinding small openings, resharpening of shapes, surfaces, radii, grinding in grooves, deburring and chamfering of precision parts.
The sanding arm can be swiveled up to 60 ° at the touch of a button. Suction nozzle with adapter for vacuum cleaner enables clean work.
Main housing made of glass fiber reinforced POLYAMIDE.
220-240 V. 100 W.
Sanding belt 10 x 330 mm (available sanding area 10 x 110 mm)
Grinding speed 300 - 700 m / min.
Length 350 mm
Weight 650 g
Insulated to class 2
Cylinder sander 230V, speed
€193.99*
Hard to reach areas can be machined very precisely with the device and provided with a uniform longitudinal grinding. Ideal for grinding niches, angles or bottlenecks. Perfect finishing of metal or wood surfaces, for sanding, brushing, satin finishing, but also cleaning of steel, non-ferrous metals and especially stainless steel. Balanced special motor, powerful, quiet, durable. Die-cast aluminum housing, stepless speed control (full-wave electronics) for low and constant speeds even with high contact pressure. Incl. Satinierwalze Medium and one Schleifmopwalze (grain 120 and 240). 230V, 100 Watt, speed range 800-2,800 / min., Length 270mm. Insulated to class 2.
Grinding mop cylinder 120 grit for cylinder sander, 2 pcs
€13.99*
For cleaning, sanding and removing flat surfaces. Elastic, adapt to the contours of the workpiece to be machined, especially excellent for working hard to reach places. Ø 50mm, width 30mm, content 2 pieces each.
Grinding Wheel corundum, grit 150
€15.99*
Grain size:
150
Corundum grinding wheels, self-adhesive
For all types of wood, non-ferrous metals, steel, plastics, cork, rubber and minerals.
delivery
Incl. Silicone film for storing and replacing used discs. 5 pieces / pack.
Dimensions: Ø 125 mm.
Grain size 150
Grinding Wheel corundum, grit 240
€15.99*
Grain size:
240
Corundum grinding wheels, self-adhesive
For all types of wood, non-ferrous metals, steel, plastics, cork, rubber and minerals.
delivery
Incl. Silicone film for storing and replacing used discs. 5 pieces / pack.
Dimensions: Ø 125 mm.
Grain size 240
Grinding Wheel corundum, grit 80
€15.99*
Grain size:
80
Corundum grinding wheels, self-adhesive
For all types of wood, non-ferrous metals, steel, plastics, cork, rubber and minerals.
Content:
Incl. Silicone film for storing and replacing used discs. 5 pieces / pack.
Dimensions: Ø 125 mm.
Grain size 80
Long neck angle grinder 230V, 15,000rpm
€139.99*
Fits perfectly to roll grinder!
Long, slim and sturdy die-cast aluminum gear head for versatile applications - also suitable for cutting. For processing of plastic, steel, non-ferrous metal, glass, ceramics, for cutting, roughing, (fine) grinding and shaping in wood. Balanced DC special motor, powerful, quiet, long-living. Housing made of glass fiber reinforced polyamide. Incl. Corundum grinding wheel (grain 60), fin grinding wheel (grain 100) and fabric-reinforced cutting disc. 230V, 100 watts, 15,000 / min. Washers Ø 50mm with 10mm hole, length 270mm. Insulated to class 2, incl. Sturdy case.
MICRO coordinate table KT 70 by PROXXON
€119.99*
The MICRO coordinate table KT 70 by PROXXON is made of high-strength aluminum (surface-compacted)
with backlash-free adjustable dovetail guides.
Three continuous T-slots (MICROMOT standard 12 x 6 x 5 mm).
Sliding ruler facilitates the positioning of the cross slide.
Further information
Table with 3 T-slots, sliding ruler. Handwheels with adjustable scale ring (1 scale = 0.05 mm). Incl. Stair chucks and fastening elements for MICROMOT drill stands.
Dimensions
Table 200 x 70 mm, adjustment range across 134 mm, depth 46 mm, height 43 mm.
MICRO Milling Machine MF 70 PROXXON
€401.99*
The MICRO Milling Machine MF 70 from PROXXON. Small but nice: the precise vertical milling machine for laboratories, opticians, jewelers, electronics and modelers.
For working with extremely small milling cutters. Stable machine base made of cast iron, vertical guide and XY stage made of high-strength aluminum (surface-compacted). Backlash-free, adjustable dovetail guide in all axes.
Outrigger housing made of die-cast aluminum, with 24-pole special motor (balanced). For vibration-free work at high speeds.
Tool holder with MICROMOT system collets (steel, hardened, 3-fold slotted); each with 1 piece 1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2 mm.
Table with 3 continuous T-slots (MICROMOT standard 12 x 6 x 5 mm). A sliding ruler facilitates the positioning of the cross slide. All handwheels with scale ring adjustable to 0 (1 turn = 1.0mm, 1 graduation = 0.05 mm).
The illustrated clamps are included, but not the workpieces.
Special features
Boom housing made of die-cast aluminum, with 24-pole, balanced special motor. Tool holder through 3-fold slotted, hardened steel collets (Ø 1.0 / 1.5 / 2.0 / 2.4 / 3.0 / 3.2 mm). Table with T-slots, sliding ruler. Handwheels with adjustable scale ring (1 scale = 0.05 mm).
Dimensions
Table 200 x 70 mm, travel 134 mm across, 46 mm lengthwise, 80 mm high. Total height 340 mm.
Additional information
Motor 220-240 V = / 100 W, spindle speeds 5,000-20,000 / min.
MICRO screwdriver set
€47.99*
The MICRO-DRIVER screwdriver set from PROXXON. Feinstschraubendreher for electricians, camera makers, watchmakers, jewelers, precision mechanics and modelers.
Blades made of high-alloy nickel-chromium-molybdenum steel (SAE 8660). For extreme hardness and toughness. Chrome-plated, with burnished tip. Ergonomically shaped handle made of high-quality plastic (impact-resistant, oil and acid-resistant). With rotatable centering head and finger recess
Firm space for any size in the practical plastic base. As a table stand, but also for wall mounting.
Note: When working with micro screwdrivers, forget about the usual raw power of screwdrivers. Here only feeling and rest are announced. The rotatable centering head with finger recess helps with one hand.
delivery
Set in the pedestal:
Slot: 1/2/3 mm.
Phillips: PH 0-3 / 0 / 1-2.
Torx: T5 / 6/8/10/15.
Hexagon: 1.5 / 2 / 2.5 / 3 mm.
MICROMOT 50 milling machine
€39.99*
The PROXXON drilling and milling machine, MICROMOT 50, is highly precise and multifunctional.
It is suitable for drilling, milling, grinding, polishing, brushing, cleaning, derusting, cutting, engraving, signing.
For processing steel, precious metals, glass, ceramics, plastics, and minerals.
Due to the low safety voltage, it is also suitable for working with coolant (wet grinding and cutting). Housing made of fibreglass-reinforced POLYAMIDE with a pleasant soft component in the handle area.
20 mm - system adaptor for flanging to MICROMOT accessories.
Without speed control (constant 20,000 RPM).
MICROMOT bending shaft with precision aluminum handpiece
€41.99*
MICROMOT bending shaft 110 / BF
Double ball bearing, ground steel shaft with mounting for MICROMOT steel collets. Ball-bearing shaft end on the machine side. Highly flexible core (no hot running with tight radii). Length 100 cm. For a maximum of 25,000 / min. With quick-action chuck 0.3 to 3.2 mm. Practical when working with different shank diameters.
MICROMOT/ PROXXON steel collet set
€15.99*
MICROMOT steel collets are hardened and thus have a high, consistent flexibility. They also maintain prolonged accuracy, even after regular use (these collets should not be compared with unhardened, fourslit collets of brass and aluminium).
The triple slit collet is substantially more difficult to manufacture than the four-slit type, but offers a better load-bearing surface.
This is especially important for cutters with small shaft diameters.
Triple slit and hardened.
1 each of 1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2mm.
With clamping nut and holder for storage.
Our drill chuck (Reference 343789) provides more convenience to quickly change the tools when working with shafts of varying diameters (e.g. HSS drills as per DIN 338). However, because of their technical setup, they have a few drawbacks compared to collets: Less clamping force and higher concentricity tolerances. If high precision is necessary, then working with MICROMOT steel collets is a must.
Multiple collet chuck set
€114.99*
The multi-range collet set ER 11 from PROXXON. Suitable for the main spindle of the FD 150 / E.
High concentricity. Can be reduced to 0.5 mm below nominal diameter (intermediate dimensions not required).
D = 11.5 mm, L = 18 mm. One piece each 2.0 - 2.5 - 3.0 - 4.0 - 5.0 - 6.0 and 7.0 mm. With clamping nut M 16 x 1. Delivered in wooden box.
High concentricity
Diameter: 11.5 mm, length: 18 mm
7 collets (2.0 - 2.5 - 3.0 - 4.0 - 5.0 - 6.0 and 7.0 mm)
Including clamping nut M 16 x 1
Poliermaschine Star
€353.99*
Ein echter "Star", dabei erstaunlich günstig. Für Normbürsten und Einsätze bis 4“ oder 102 mm. Tragende Konstruktion aus Alu-Seitenteilen mit ausgespindelten Lagerpassungen für vibrationsarmen und sehr leisen Lauf. Mit langer, kugelgelagerter Hauptwelle (Distanz von Scheibe zu Scheibe ca. 360 mm) und verstellbaren Schutzhauben für sauberes Arbeiten mit Polierpasten. Kräftiger Antrieb durch DC-Motor mit Drehzahlregelung (Vollwellenelektronik). Für hohes Anzugsmoment und enorme Durchzugskraft auch bei starkem Anpressdruck. Zum Festschrauben, aber auch zur horizontalen und vertikalen Befestigung mittels dazu gehörender Schraubzwinge. Inklusive je 1 Stoff-Polierschwabbel hart und weich (100 x 15 mm) sowie 1 x Universal-Polierriegel (80 g).
230 V, 140 Watt.
Regelbare Drehzahl 1.000 - 3.100/min.
Maße: 360 x 220 x 250mm.
Power supply for soldering iron LG12
€38.99*
Specially made for low voltage devices such as the Proxxon soldering iron. Safe power source, housing made of especially
heat-resistant Noryl. Folding tray bracket on housing. 220–240 V. Supplies 2.0 A at 16 V idling and 12 V operating voltage.
Insulation-protected in acc. w. Class 2. (without electronic speed controller, not required for soldering iron)
Proxxon 2-speed scroll saw
€281.99*
The right device for mould construction, precision mechanics, model building, architectural model building, designing, toy manufacturing (puzzles as well), carpentry (refurbishing antique furniture). Also ideal for schools and training workshops. For standard saw blades with pin ends. But normal fretsaw blades without pins also can be securely clamped.
Cutting performance 50mm in wood, 30mm in plastic, 10mm in non-ferrous metals. For cutting Plexiglas, glass fibre reinforced plastic, foam, rubber, leather or cork. Slender saw arm of die-cast aluminium for unobstructed view from top. Air blower with adjustable air nozzle. Sturdy table of die-cast aluminium (360 x 180mm), can be tilted by 45° for mitre sawing. Base housing of cast steel for stability and working without vibrations. Includes 5 each coarse and fine saw blades.
Technical data:
230V. Powerful, brushless 2-speed motor (205W). Stroke alternatively 900 or 1,400rpm. Stroke length 19mm. Throat 400mm. Maximum cutting depth 50mm, at 45° mitre 25mm. Weight approx. 20kg.
PROXXON alternate cutting-off weel for truncation machine Ø 50 mm
€3.99*
The cutting disc from PROXXON.
Ceramic bound. Made of mixed coloring: 50% aluminum oxide and 50% silicon carbide.
For cutting steel and non-ferrous metal. Also for cutting smaller wooden and plastic rods.
Ø 50 mm
Mixed corundum
50% aluminum oxide
50% silicon carbide
PROXXON angle polisher WP/E
€157.99*
The angle polisher WP / E by PROXXON is the smallest and finest in the world! With 50 mm rubber pad.
For perfect surfaces, even when things get tight: For refining bare surfaces, cleaning, derusting, for the "final touch" after painting.
Balanced special motor, powerful, quiet and durable. Smooth planetary gear in die-cast aluminum housing and infinitely variable speed control (full-wave electronics) for low and constant speeds even at high contact pressure.
Main housing made of glass fiber reinforced POLYAMIDE with soft component. Safely stored in a stylish suitcase made of high-quality PP with original equipment for immediate use: rubber pad with velcro fastening, polishing sponge (medium hard), 12 grinding wheels K 2000 and NIGRIN polishing emulsion (75 ml) and microfibre cloth.
particularities
Smooth planetary gear in die-cast aluminum housing and infinitely variable speed control (full-wave electronics) for low and constant speeds even at high contact pressure. Main housing made of glass fiber reinforced POLYAMIDE with soft component.
delivery
Complete with extensive original equipment in a suitcase. Safely stored in a stylish suitcase made of high-quality PP with original equipment for immediate use: Rubber pad with velcro fastener, polishing sponge (medium hard), lambskin polishing disc, polishing felt for metals and non-ferrous metals (medium hard), 12 grinding wheels K 2000 and NIGRIN polishing emulsion (75 ml) and microfiber cloth.
Further information
Technical data: 220-240 V / 50 Hz. 100 W. 800-2,500 / min. Length 27 cm. Weight 720 g. Insulated to class 2.
PROXXON Bench Drill
€227.99*
The table drill TBM 220 by PROXXON. For precise work: Drills also 0.5 mm holes. With three-stage belt transmission.
Plan-milled worktable made of die-cast aluminum (220 x 120 mm) with rip fence and scale. As well as threaded holes for attaching the MICRO coordinate table KT 70.
Solid, hard-chromed steel column (20 x 340 mm). Outrigger in die-cast aluminum with spindled guides and fits.
High-quality, VDE-tested electric motor, extremely quiet and very durable. Drive via triple pulley. By turning the flat belt 3 idle speeds result in more than 3-fold torque in the lower speed range.
Practical drill depth indicator with adjustable stop.
particularities
Very quiet and durable.
Tool holder with 6 triple slotted and hardened precision steel collets (1 each Ø 1.0 / 1.5 / 2.0 / 2.4 / 3.0 and 3.2 mm). For this purpose, 3/8 "thread for screwing on a dental drill chuck (please order separately). Die-cast boom with pointed guides and fits.
Dimensions
Worktable (12 x 22 x 3 cm): planed from heavily ribbed die-cast aluminum. Parallel guided stop with scale. Solid, hard-chromed steel column (Ø 20 x 280 mm). Total height: 30 cm. Outreach (column inside to middle drilling spindle) 140 mm.
Further information
High-quality drive unit: VDE-tested 230-volt motor (85 watts). By turning the belt three idle speeds: 1,800, 4,700 and 8,500 rpm with more than three times the torque in the lower speed range.
PROXXON disc-type sander TG 125 / E
€214.99*
The disc sander TG 125 / E by PROXXON is ideal for grinding all types of wood, steel, non-ferrous metal, precious metal and plastic (also Plexiglas and GRP).
Powerful drive and vibration-free running due to balanced DC motor.
Aluminum table, 50 ° downwards, 10 ° upwards.
Plane-turned sanding pad made of die-cast aluminum with glued-on silicone film.
Two additional square silicone films are used to store and possibly reinstall used discs.
Technical specifications:
220 - 240V / 140W
Adjustable grinding speed of approx. 250 - 800 m / min
Sanding pad Ø 125 mm
Table 98 x 140 mm
- Precision device for the finest grinding work and the smallest material corrections.
- Suction duct with connection for connecting a vacuum cleaner for dust-free work.
- Adjustable grinding speed
PROXXON Dividing attachement
€134.99*
The dividing head of PROXXON. Ideal for the MF 70 and KT 70 microfrills.
For machining circular workpieces, producing radially offset holes and cutouts, milling of wrench flats, square edges, hexagonal edges, etc. Precise parting by vernier on the base body.
Chuck with reversible jaws: Clamping range inside 1.5 to 32 outside 12 to 65 mm. Recess for chuck 11 mm (for working longer shafts in vertical position). With mounting holes for horizontal and vertical mounting as well as suitable slot nuts and mounting screws for mounting on the MF 70 MICRO router and the KT 70 MICRO coordinate table. Supplied in a wooden box with sliding cover.
Precise dividing by nonius on the base body
11 mm recess for chuck
With mounting holes and screws
Internal clamping range: 1.5 to 32 mm
Clamping range outside: 12 to 65 mm
Size: 72 x 64 x 38 mm
