Watchmaker tools
6 serrated inserts and adapters for case opener with handwheel Bergeon
€329.99*
Set with 6 corrugated inserts
dia. 18.5 - 20.2 - 22.5 - 26.5 - 28.3 - 29.5 mm
as well as an adaptor piece for securing the inserts,
for opening and closing Rolex cases.
Accessory assortment on wooden base for jewel presser Bergeon
€493.99*
Includes:
1 press-in tool dia. 3 mm (SKU 4422604)
1 press-in tool dia. 6 mm (SKU 4422605)
1 press-in tool dia. 9 mm (SKU 4422606)
1 centring tip (SKU 4422607)
1 anvil undrilled (SKU 4422608)
1 anvil drilled dia. 8 mm (SKU 4422609)
1 anvil drilled dia. 10 mm (SKU 4422610)
1 anvil drilled dia. 16 mm (SKU 4422611)
1 anvil drilled dia. 30 mm (SKU 4422612)
1 anvil for centring (SKU 4422614)
10 cutting broaches 1.20 - 1.97 - 2.47 - 2.97 - 3.47 - 4.47 - 5.47 - 6.47 - 7.47 - 8.47 mm (SKU 4422615- 4422624)
1 dovetail bit dia. 4 mm (SKU 4422630)
1 wooden base
Adaptor for pressure pieces
€17.99*
With this adaptor, any commercially available pressure pieces with 6 mm threaded hole can be used in the Quickpress spindle press.
Excentric blade for caliber 7750
From
€30.99*
Adjustment tool for setting the 0 position on the minute counting wheel catch.
Fit for the following calibers:
ETA 7750, 7751, 7753, 7754, 7757, 7760, 7761, 7765, 7768, 7770, A07.211
Tool to adjust the eccentric screw of the "caliber family" ETA Valjoux 7750 (see above).
The screwdriver with adapted blade is ideal for adjusting the eccentric screw of the minute counter.
Swiss made quality by BERGEON
Air watch case opener standard
From
€22.99*
For lifting the plastic glasses from waterproof one-piece watch glasses.
First, the crown and shaft are removed with the supplied crown puller. The end piece that fits the tube is placed on the pump. Air is pumped into the watch with the pump until a pressure is generated that blasts the glass up and out of the seat without damaging it.
(First pull out the crown as you do when changing the time. The stem consists of 2 parts that are connected and can be pulled out (with the special key provided). Remove the half stem and the crown with the key .Using the pump: Pull out the air pump hose completely Press the plastic tip of the air pump against the watch case (or case hose) Hold the case while placing your thumb lightly on the glass and press firmly the pump to pump the glass out of the watch.)
