Product number:
241112
Product information "Sandblaster without chamber"
The sandblaster was reduced to a basic structure. Its mobility therefore depends only on the connection to compressed air. No power supply is required. Using different
versions of sandblasting modules, blasting media from 50 to 250 µm can be used. Ideal for use in an existing blast chamber.
Characteristic features
- Patented special mixing chambers for an even flow of blasting media
- Pressure indication via pressure gauge
- Integrated water separator
- Manual pneumatic shut-off valve for switching device on/off
- Control via pneumatic foot switch
Technical Specifications:
Tank capacity: 1000 ml each
Working pressure: 1-6 bar
Connection pressure: 6-10 bar
Air consumption: 120 l/min (at 6 bar)
The blasting unit requires an external compressor.
Compressor specification: 100 litres/min minimum. Suction, 6 bar pressure, micro filter 0.01?.
versions of sandblasting modules, blasting media from 50 to 250 µm can be used. Ideal for use in an existing blast chamber.
Characteristic features
- Patented special mixing chambers for an even flow of blasting media
- Pressure indication via pressure gauge
- Integrated water separator
- Manual pneumatic shut-off valve for switching device on/off
- Control via pneumatic foot switch
Technical Specifications:
Tank capacity: 1000 ml each
Working pressure: 1-6 bar
Connection pressure: 6-10 bar
Air consumption: 120 l/min (at 6 bar)
The blasting unit requires an external compressor.
Compressor specification: 100 litres/min minimum. Suction, 6 bar pressure, micro filter 0.01?.
| Article name: | Sandblaster |
|---|---|
| Brand: | Renfert |
| Content: | 1 |
| Dimensions height mm: | 260 |
| Dimensions width mm: | 130 |
| External dimension length: | 220 |
| Grain size: | 25-70 µ |
| Manufacturer name: | Basic mobil |
| Special feature: | 0.8 |
| Unit content: | Tank |
Accessoires (optional)
High-performance compressed air filter for sandblasters Renfert
€598.99*
Three-stage filter system: - Prefilter: solid particles up to 40 ? - Fine filter: smallest solid particles and water droplets up to 0.01 ? - Activated carbon filter: oil up to a residual content of 0.003 ppm Perfectly reliable filtration of water, oil and dirt particles to avoid clumping of the blasting sand due to contamination of the compressed air.
Suction Vortex Compact 3L Renfert
€1,183.99*
Powerful suction with two-stage filter system with over 99.9% efficiency. Tear-resistant large (15 litre) filter bag made of nano-fibre fleece. Even hazardous fine dust created by the removal of moulding compounds with sandblasting equipment are retained by this filter system. High suction power. Electronic speed control for adjusting the suction force. Automatic switch with release delay for sandblasters. The collector motor is excluded from the warranty as it is a wear part. (Depending on the load, the average service life is approx. 800 hours). Connection: 230 V / 50 Hz.
Blasting abrasive Cobra 50 ? Renfert
€55.99*
Article name:
Blasting abrasive Cobra 50 ?
Colour: white. Slightly abrasive with low surface roughness. Gentle removal of oxides.
Blasting abrasive Rolloblast 50 ? Renfert
€53.99*
Article name:
Blasting abrasive Rolloblast 50 ?
For smoothing and polishing metals, achieves a satin sheen, removes dirt and moulding compound.
Blasting abrasive Rolloblast 100 ? Renfert
€53.99*
Article name:
Blasting abrasive Rolloblast 100 ?
For gentle blasting of moulding compounds as well as smoothing and polishing of metal surfaces.
Blasting abrasive Cobra 125 ? Renfert
€56.99*
Article name:
Blasting abrasive Cobra 125 ?
Colour: rose. Effective removal with medium roughness.
Blasting abrasive Cobra 250 ? Renfert
€55.99*
Article name:
Blasting abrasive Cobra 250 ?
Colour white. Very abrasive. For large-scale removal of investment materials and for the removal of hard oxide layers.