GRS engraver's cushion Standard Block

€1,282.99*

Currently not available. Delivery time: about 2 weeks

STK

Product number: 233891

Product information "GRS engraver's cushion Standard Block"

This engraver's cushion is an economical option that will meet the needs of many engravers and stone setters. With its two-ball bearing system for smooth rotary motion without wear or play, the standard block unites outstanding quality with value and ensures a safe hold for your workpieces. The rotational resistance can be adjusted with the internal rotation braking system. Made of solid stainless steel with satin finish. Black holding jaws reduce glare and eye strain. Includes the holding plates for the upper holding jaws, 4 pins, the engraver's cushion, an Allen key, and a chuck key.

Article name:	Engraver's cushion Standard Block
Brand:	GRS
Catalogue item No.:	003-530
Clamping range:	76 mm
Dimensions Ø mm:	130.000
Gross weight grams:	9300.00
Special feature:	8,6 kg

Accessoires (optional)

GRS-Super Pins

These pins are ideal for holding large objects without damaging them. They are made of steel and are coated with durable plastic. They fit into the retaining jaw holes of any GRS engraver's cushion. Shaft 6.3 mm Head 15.8 x 15.8 mm Contents 4 pcs

€29.99*

BenchMate pitch cup, round, dia. 45, 8mm with pitch

The pitch cup is filled with a special setter pitch that softens when heated. Small, fragile, or irregularly shaped pieces can be easily held in place for engraving, stone setting, and other work. Fits all vices, engraver's cushions, or BenchMate systems. Diameter: 50.8 mm.

€80.99*

Thermo Loc starter kit GRS

Supplied with a non-adhesive, square pad (152 × 152 mm) made of microwavable PTFE material (Teflon) and 450 g Thermo-Loc. 450 g = approx. 60 sticks For all objects that cannot be held with the pliers. The Thermo Loc stick can be heated in a microwave, with a heat blower, or in a heating furnace. Thermo Loc softens at about 60 °C. The workpiece can then be affixed, and the composition cures again at room temperature. Reusable and non-toxic.

€139.99*

GRS ring holder for engraving

This unique holder for affixing rings allows for easy processing of their inside. They can be held in your hand or in any vice or engraver's cushion. Made of solid steel for long life.

€161.99*

GRS ring holder with 7 inserts, horizontal for vice

This holder securely and firmly holds the rings on their inside. Ideal for setting stones or for engraving work. Fits all GRS engraver's cushions and most vices. Includes: Holder body, 7 clamping sleeves dia. 22 - 21 - 20 - 18 - 16 - 15 - 14 mm Expansion mandrel Bolts and keys

€164.99*

GRS ring holder with 7 inserts, vertical for vice

€148.99*

Big retaining plate XL for engraver's cushion, height adjustable

Recommended for use with the standard block or the MagnaBlock. The height of the engraver's cushion can be varied by 24.5 mm. 178 × 178 × 178 mm

€230.99*

BenchMate angled plate for suspension bracket

Angled plate for mounting on workbench. Nuts and bolts included.

€98.99*

BenchMate suspension bracket

Dovetail shaped. For attaching suspension plate to round or thin workbench tops.

€58.99*

Thermo Loc Versa-Clamp Kit mounting kit for engraver's cushions

This kit helps the user create custom-made holding jaws from Thermo-Loc for holding special parts for engraving or gemstone setting. Includes aluminium brackets in two sizes for creating smooth and precise Thermo-Loc attachments for use with almost any engraver's cushion. Special centre rods separate the holding jaw halves and align them to each other. Three sets of spacer inserts of different length ensure thickness and uniformity of the Thermo-Loc holding jaws.

€172.99*

GRS Index ring holder set

The GRS ID ring holder redefines holding of rings. By tightening the clamping axle, the clamping sleeve is pressed into the clamping cones on both sides. This creates uniform pressure and spreads the clamping sleeve evenly. This holds the ring securely on the inside. When using the standard cone, the tension can be adjusted so that the ring can rotate easily during engraving. In contrast, the clamping cone locks the clamping sleeve so that the ring is held in a fixed position. This allows for secure stone setting. The ring holder is a good, affordable choice if you are looking for a simple, functional, and high-quality solution. Includes: (1) ID ring holder, (2) sets of 10 pieces each of clamping sleeves, (2) standard cones, (2) cones with special toothing, (1) clamping axle, (1) retaining nut, (1) hex nut, and (1) GRS Allen wrench. Clamping sleeve diameter: 13.5 mm, 14.5 mm, 15.5 mm, 16.5 mm, 17.5 mm, 18.5 mm, 19.5 mm, 20.5 mm, 21.5 mm, 22.5 mm Pictured in the assembled state with 18.5 mm clamping sleeve and standard cone.

€204.99*

GRS retaining plate support

Support for retaining plate Provides greater stability to avoid vibrations.

€185.99*

GRS ring clamping set, 2 pieces with leather cover

This ring clamping set with leather cover on the front sides holds rings securely on their outer sides in GRS engraver's cushions. Ideal for stonesetting or engraving. This ring clamping set is included in the clamping and holding tool set (#003-520).

€65.99*

Thermo-Loc Sticks 225g.

€81.99*

Thermo-Loc Sticks 450g.

€118.99*

Clamping+holding tool set for GRS engraver's cushions

Using the different pins that fit into the holding jaws of any GRS engraver's cushion, problems holding workpieces can be solved quickly. Includes: -4 half Thermo-Loc-rods -8 small pins -4 flat square pins -2 rectangular pins with milled round profile -4 thick, round pins with a profiles milled on the side -8 rubber-coated pins -2 ring clamps with leather cover. Includes support pedestal

€263.99*

GRS turntable mounting kit

Required for mounting the turntable (#003-616-V2) on large support plates for engraver's cushions.

€50.99*

1 height-adjustable holder with suspension bracket

For secure mounting of BenchMate accessories to the workbench.

€137.99*

PTFE pad, non-adhesive, for Thermo-Loc

Microwaveable pad made of Teflon for Thermo-Loc.

€46.99*

Thermo-Loc holding jaw kit for Standard Block engraver's cushion

For engraver's cushion Standard Block #003-530 With the help of the Thermo-Loc holding jaw kit, users can easily create user-specific holding jaws to hold almost any workpiece securely. The kit includes two upper holding jaws (one of which is rotatable), four connecting bars, bolts, and a wrench. When ordering, please make sure to choose the right kit for your engraver's cushion.

€149.99*

GRS Super Pins 9.5 mm, 2 pieces, for engraver's cushion and vice

These pins are ideal for holding large objects without damaging them. They are made of steel and are coated with durable plastic. They fit into the retaining jaw holes of any GRS engraver's cushion.

€26.99*

GRS hex driver 6mm for all engraver's cushions except MicroBlock

This key has a round, flat, and knurled aluminium knob and can remain in the engraver's cushion wile working. Fits all GRS engraver's cushions except in MicroBlock.

€42.99*

GRS round contour clamping set for engraver's cushions

Innovative and secure hold for irregularly shaped parts. The holding jaws fit into the upper holes of all GRS engraver's cushions. The holding jaws coated with hard rubber adjust automatically for a firm grip on almost any shape with minimal clamping force. This allows affixing parts with an unusual shape quickly and securely for engraving or gemstone setting.

€173.99*

GRS leather pieces, 2 pcs., for providing hold in engraver's cushions

Thick, grained leather pieces for a secure hold of workpieces in any vice or engraver's cushion. Can be used in combination with diamond spray for polishing gravers and tools. Includes two pieces of leather. Dimensions (L × W): 50.8 × 76.2 mm

€20.99*

GRS workpiece retaining plate for engraver's cushions

Originally designed for scrimshaw artists in the GRS training centre for engraving even the finest objects, this unique tool allows affixing a workpiece gently without damaging it. Ideally suited for detail work on thin, light pieces that cannot be held in an engraver's cushion. The pieces are affixed with the aid of clay or Thermo-Loc, which can be pressed into the milled slots. Diameter: 152.4 mm

€125.99*

GRS holding base for clamping and holding tool set 520

Upgrade the previous model with the new holding base 520, which can accommodate all the parts of the former wood model.

€25.99*

GRS Teflon plate for engraver's cushions and turntable

For mounting between engraver's cushion and turntable in order to easily move the engraver's cushion to any desired location on the turntable. Intended for easier positioning of larger parts under the microscope.

€52.99*

BenchMate ring holder set Scope for vices and engraver's cushions

This holder is similar to the horizontal holder (#004-679), but larger that large objects, such as riflescope rings for shotguns can be held firmly from the inside. It fits all GRS engraver's cushions and most vices. For rings with inner diameter of 25.4 mm and 30 mm. Consists of holder body, two clamping sleeves, extension cones, and screw with key.

€173.99*

BenchMate ring mandrel, aluminium

Interchangeable clamping jaws hold rings securely for processing without deforming. It is similar to the BenchMate holder, but for the ease of manual work, it is lighter and made of sturdy aluminium.

€161.99*

BenchMate pitch cup, square 127 x 89 x 12.7mm, with pitch

The pitch cup is filled with a special setter pitch that softens when heated. Small, fragile, or irregularly shaped pieces can be easily held in place for engraving, stone setting, and other work. Fits all vices or engraver's cushions. Dimensions (L × W × D): 127 × 89 × 12.7 mm

€166.99*

BenchMate pitch cup, round, dia. 50, 8mm without pitch

Fits all vices, engraver's cushions, or BenchMate systems. Diameter: 50.8 mm. Pitch not included.

€42.99*

GRS knife contour clamp kit

Developed and manufactured by an engraver and knife maker, this holder holds a knife so tight within seconds that engravings and other fine works can be carried out safely. Special, linearly shaped chain holding jaws adapt easily to uncommon and complex shapes. With the special hard rubber coating, the holding jaws grip securely and without large tension forces. The knife contour clamping kit can be adapted for a variety of knives with different thickness and width and can also be easily inserted into most engraver's cushions. Overall dimensions: 76.2 x 127 mm Holds objects up to 44.4 in mm width. Span: 38.1 mm

€256.99*

Design- und Layout-Arbeitsplatte

Die GRS® Design- und Layout-Arbeitsplatte ist eine komfortable Mehrzweck-Arbeitsplatte, die sich in jede GRS-Gravierkugel einspannen lässt. Die stabile, mit einem Durchmesser von 15 cm genügend grosse Arbeitsfläche, ermöglicht dem Anwender, alle Arbeiten bei denen eine Vergrösserung unter dem Mikroskop hilfreich ist, sicher auszuführen. Die Platte ist mit hochwertigem, weichem Echtleder bezogen, sodass Beschädigungen feiner Werkstücke vermieden werden. Diese Arbeitsplatte bietet zudem viel Bewegungsfreiheit, was bei Layoutarbeiten von grossem Vorteil sein kann.

€137.99*

Universal-Positionierstift-Kloben

Diese von Sergej Manaenko erdachte Lösung zur Werkstückfixierung macht aus jeder Gravierkugel einen Positionierstift-Kloben. Das Schienensystem auf der Unterseite passt in die Haltebacken einer jeden GRS-Gravierkugel. Verschieben Sie es in den Haltebacken oder drehen Sie es, sodass Sie stets den perfekten Mittelpunkt unter dem Mikroskop finden. • Selbstzentrierendes Haltebackensystem • Perfekt für kleine Stücke, wie Teile von Uhren, Anhänger, kleine Messer und vieles mehr • Arbeiten Sie stets zentriert unter dem Mikroskop • Bidirektionale Rotation • Drehwiderstand einstellbar von «lose» bis «fest» • Hochwertiger Edelstahl • 2,38 mm Messing- und Stahlstifte (Im Lieferumfang enthalten sind 1 Universal-Positionierstift-Kloben, 4 Stahlstifte, 4 Messingstifte, 1 Sechskantschlüssel, 1 MicroBlock® Gummisockel) Der Universal-Positionierstift-Kloben ist kompatibel mit allen GRS Gravierkugeln (nicht im Lieferumfang enthalten). • Gewicht: 337 g • Klobendurchmesser: 50 mm • Haltebackenbreite: 50 mm • Haltebackenhöhe: 8,3 mm • Max. Öffnung: 31 mm (68,5 mm mit Stiften)

€506.99*

Alexander Ringhalter-Adapter

Ermöglicht die Verwendung des Alexander Ringhalters (#003- 782) im GRS Standard Block (#003-530 und #003-531).

€178.99*

Engraver's cushion holder for BenchMate GRS

Angular bracket for engraver's cushions. For insertion into the dovetail BenchMate suspension bracket. Suitable for attachment of accessories in an adaptedheight up to 101.6 mm max. Adjustable in steps of 12.7 mm.

€138.99*

Ring stick for BenchMate GRS

By exchanging the plastic sleeves, rings of different diameters can be held from the inside. The ring is clamped in quickly and easily with a cone and an Allen wrench. Includes seven interchangeable plastic inserts dia. 14 - 15.5 - 17 - 18.5 - 19.5 - 20.5 - 22 mm.

€251.99*

Replacements

Arretierungsstift für GRS-Gravierkugel MagnaBlock

Passend für: Gravierkugel MagnaBlock 003-530 (Flume-Nr. 226597) Gravierkugel MagnaBlock & Haltewerkzeugset 003-522 (Flume-Nr. 319553)

€25.99*

Feder für GRS-Gravierkugeln StandardBlock und Niedrigprofil

Passend für: Gravierkugel StandardBlock 003-530 (Flume-Nr. 233891) Gravierkugel StandardBlock & Haltewerkzeugset 003-531 (Flume-Nr. 249737) Gravierkugel Niedrigprofil 003-615 (Flume-Nr. 310804)

€16.99*

Austauschsatz Gewinde/Muttern für GRS-Gravierkugel StandardBlock