GRS engr. cushion MikroBlock

€706.99*

Available, delivery time: 2-3 days

STK

Product number: 249736

Product information "GRS engr. cushion MikroBlock"

This work tool uniquely unites a small and handy size with sturdiness.
The MicroBlock with its self-centring holding jaw system was developed for setting stones, for small engravings, and for other precision work.
Thanks to the internal rotation braking system, the rotational resistance can be chosen between "free" and "locked". This engraver's cushion with its low profile is ideal for working under the microscope.
Includes 4 holding pins, 2 chuck keys, 6 screws, one plastic support, one Allen key, and one Thermo-Loc sample kit.

Article name:	Engraver's cushion MikroBlock
Brand:	GRS
Catalogue item No.:	003-683
Clamping range:	50 mm
Dimensions Ø mm:	80.000
Gross weight grams:	1800.00
Special feature:	1.8 kg

Accessoires (optional)

GRS-Super Pins

These pins are ideal for holding large objects without damaging them. They are made of steel and are coated with durable plastic. They fit into the retaining jaw holes of any GRS engraver's cushion. Shaft 6.3 mm Head 15.8 x 15.8 mm Contents 4 pcs

€29.99*

BenchMate pitch cup, round, dia. 45, 8mm with pitch

The pitch cup is filled with a special setter pitch that softens when heated. Small, fragile, or irregularly shaped pieces can be easily held in place for engraving, stone setting, and other work. Fits all vices, engraver's cushions, or BenchMate systems. Diameter: 50.8 mm.

€80.99*

Thermo Loc starter kit GRS

Supplied with a non-adhesive, square pad (152 × 152 mm) made of microwavable PTFE material (Teflon) and 450 g Thermo-Loc. 450 g = approx. 60 sticks For all objects that cannot be held with the pliers. The Thermo Loc stick can be heated in a microwave, with a heat blower, or in a heating furnace. Thermo Loc softens at about 60 °C. The workpiece can then be affixed, and the composition cures again at room temperature. Reusable and non-toxic.

€139.99*

GRS ring holder for engraving

This unique holder for affixing rings allows for easy processing of their inside. They can be held in your hand or in any vice or engraver's cushion. Made of solid steel for long life.

€161.99*

GRS ring holder with 7 inserts, horizontal for vice

This holder securely and firmly holds the rings on their inside. Ideal for setting stones or for engraving work. Fits all GRS engraver's cushions and most vices. Includes: Holder body, 7 clamping sleeves dia. 22 - 21 - 20 - 18 - 16 - 15 - 14 mm Expansion mandrel Bolts and keys

€164.99*

GRS ring holder with 7 inserts, vertical for vice

€148.99*

Big retaining plate XL for engraver's cushion, height adjustable

Recommended for use with the standard block or the MagnaBlock. The height of the engraver's cushion can be varied by 24.5 mm. 178 × 178 × 178 mm

€230.99*

BenchMate angled plate for suspension bracket

Angled plate for mounting on workbench. Nuts and bolts included.

€98.99*

BenchMate suspension bracket

Dovetail shaped. For attaching suspension plate to round or thin workbench tops.

€58.99*

Thermo Loc Versa-Clamp Kit mounting kit for engraver's cushions

This kit helps the user create custom-made holding jaws from Thermo-Loc for holding special parts for engraving or gemstone setting. Includes aluminium brackets in two sizes for creating smooth and precise Thermo-Loc attachments for use with almost any engraver's cushion. Special centre rods separate the holding jaw halves and align them to each other. Three sets of spacer inserts of different length ensure thickness and uniformity of the Thermo-Loc holding jaws.

€172.99*

GRS Index ring holder set

The GRS ID ring holder redefines holding of rings. By tightening the clamping axle, the clamping sleeve is pressed into the clamping cones on both sides. This creates uniform pressure and spreads the clamping sleeve evenly. This holds the ring securely on the inside. When using the standard cone, the tension can be adjusted so that the ring can rotate easily during engraving. In contrast, the clamping cone locks the clamping sleeve so that the ring is held in a fixed position. This allows for secure stone setting. The ring holder is a good, affordable choice if you are looking for a simple, functional, and high-quality solution. Includes: (1) ID ring holder, (2) sets of 10 pieces each of clamping sleeves, (2) standard cones, (2) cones with special toothing, (1) clamping axle, (1) retaining nut, (1) hex nut, and (1) GRS Allen wrench. Clamping sleeve diameter: 13.5 mm, 14.5 mm, 15.5 mm, 16.5 mm, 17.5 mm, 18.5 mm, 19.5 mm, 20.5 mm, 21.5 mm, 22.5 mm Pictured in the assembled state with 18.5 mm clamping sleeve and standard cone.

€204.99*

GRS retaining plate support

Support for retaining plate Provides greater stability to avoid vibrations.

€185.99*

GRS ring clamping set, 2 pieces with leather cover

This ring clamping set with leather cover on the front sides holds rings securely on their outer sides in GRS engraver's cushions. Ideal for stonesetting or engraving. This ring clamping set is included in the clamping and holding tool set (#003-520).

€65.99*

GRS elevation for engraver's cushion Micro Block, cont. 5 pcs

Now user can adjust the working height easily - using this new StepRiser for Microblock. Reduce fatigue and increase your efficiency, especially under a microscope. Each elevation piece adds 12.7 mm to the working height of the MicroBlock (Flume SKU 249736 / GRS #003-683). They are lightweight and securely stacka. The plastic pad fits into the mould cavity of each elevation piece, or the elevation piece itself can be used as a pad. A pack contains five separate elevation pieces, 12.7 mm each.

€56.99*

Thermo-Loc Sticks 225g.

€81.99*

Thermo-Loc die plate

Use this Thermo-Loc die plate to create workpiece holders shaped as desired The many smaller recesses are used without the separator piece in order to obtain secure holders for items, such earrings or pendants. With the separator piece, you can easily create a pivotable holder suitable for longer objects (such as bracelets), allowing them to be engraved free from vibrations These custom-made holder can be used in most engraver's cushions or vices.

€85.99*

Thermo-Loc Sticks 450g.

€118.99*

Clamping+holding tool set for GRS engraver's cushions

Using the different pins that fit into the holding jaws of any GRS engraver's cushion, problems holding workpieces can be solved quickly. Includes: -4 half Thermo-Loc-rods -8 small pins -4 flat square pins -2 rectangular pins with milled round profile -4 thick, round pins with a profiles milled on the side -8 rubber-coated pins -2 ring clamps with leather cover. Includes support pedestal

€263.99*

1 height-adjustable holder with suspension bracket

For secure mounting of BenchMate accessories to the workbench.

€137.99*

PTFE pad, non-adhesive, for Thermo-Loc

Microwaveable pad made of Teflon for Thermo-Loc.

€46.99*

GRS Super Pins 9.5 mm, 2 pieces, for engraver's cushion and vice

These pins are ideal for holding large objects without damaging them. They are made of steel and are coated with durable plastic. They fit into the retaining jaw holes of any GRS engraver's cushion.

€26.99*

GRS hex driver 6mm for all engraver's cushions except MicroBlock

This key has a round, flat, and knurled aluminium knob and can remain in the engraver's cushion wile working. Fits all GRS engraver's cushions except in MicroBlock.

€42.99*

GRS round contour clamping set for engraver's cushions

Innovative and secure hold for irregularly shaped parts. The holding jaws fit into the upper holes of all GRS engraver's cushions. The holding jaws coated with hard rubber adjust automatically for a firm grip on almost any shape with minimal clamping force. This allows affixing parts with an unusual shape quickly and securely for engraving or gemstone setting.

€173.99*

GRS leather pieces, 2 pcs., for providing hold in engraver's cushions

Thick, grained leather pieces for a secure hold of workpieces in any vice or engraver's cushion. Can be used in combination with diamond spray for polishing gravers and tools. Includes two pieces of leather. Dimensions (L × W): 50.8 × 76.2 mm

€20.99*

GRS workpiece retaining plate for engraver's cushions

Originally designed for scrimshaw artists in the GRS training centre for engraving even the finest objects, this unique tool allows affixing a workpiece gently without damaging it. Ideally suited for detail work on thin, light pieces that cannot be held in an engraver's cushion. The pieces are affixed with the aid of clay or Thermo-Loc, which can be pressed into the milled slots. Diameter: 152.4 mm

€125.99*

GRS holding base for clamping and holding tool set 520

Upgrade the previous model with the new holding base 520, which can accommodate all the parts of the former wood model.

€25.99*

GRS Teflon plate for engraver's cushions and turntable

For mounting between engraver's cushion and turntable in order to easily move the engraver's cushion to any desired location on the turntable. Intended for easier positioning of larger parts under the microscope.

€52.99*

BenchMate ring holder set Scope for vices and engraver's cushions

This holder is similar to the horizontal holder (#004-679), but larger that large objects, such as riflescope rings for shotguns can be held firmly from the inside. It fits all GRS engraver's cushions and most vices. For rings with inner diameter of 25.4 mm and 30 mm. Consists of holder body, two clamping sleeves, extension cones, and screw with key.

€173.99*

BenchMate ring mandrel, aluminium

Interchangeable clamping jaws hold rings securely for processing without deforming. It is similar to the BenchMate holder, but for the ease of manual work, it is lighter and made of sturdy aluminium.

€161.99*

BenchMate pitch cup, square 127 x 89 x 12.7mm, with pitch

The pitch cup is filled with a special setter pitch that softens when heated. Small, fragile, or irregularly shaped pieces can be easily held in place for engraving, stone setting, and other work. Fits all vices or engraver's cushions. Dimensions (L × W × D): 127 × 89 × 12.7 mm

€166.99*

BenchMate pitch cup, round, dia. 50, 8mm without pitch

Fits all vices, engraver's cushions, or BenchMate systems. Diameter: 50.8 mm. Pitch not included.

€42.99*

Ringhaltersatz «Alexander»

Dieser, vom weltberühmten Steinfasser Alexander Sidorov entwickelte Ringhalter, ist das Ergebnis langjähriger Erfahrung in der Anwendung und Vermittlung von Steinfassungstechniken. Der Ringhalter «Alexander» wird direkt am GRS-MicroBlock befestigt, sodass für die Ringgravur und das Fassen von Edelsteinen auf Ringen unendlich viele Möglichkeiten zur Verfügung stehen. Zu der Vorrichtung gehören zwei glockenförmige Klemmbackenaufsätze, die entwickelt wurden, um die Funktion der vertikalen und horizontalen Spannachsen zu erweiterten. Dem Set liegen horizontale Spannachsen in zwei unterschiedlichen Grössen bei, sodass Ringe beinahe jeder Weite eingespannt werden können. Der vertikale Ringhalter verfügt über einen kugelförmigen Sockel, der Bewegungen um mehrere Achsen erlaubt, damit ein optimaler Zugang zu der gewünschten Arbeitsfläche möglich ist. Der Vorrichtung liegen zudem zwei vollständige, 10-teilige Spreizhülsensätze bei, die in einer hochwertigen Aluminiumkassette aufbewahrt werden (MicroBlock separat erhältlich). Der Ringhaltersatz «Alexander» enthält: 2 glockenförmige Klemmbackenaufsätze 6 Halbrundkopfschrauben 1 Spannschlüssel 1 kurze horizontale Spannachse 1 lange horizontale Spannachse 1 vertikale Spannachse 2 Standardkonusse aus Kunststoff 2 Sperrkonusse aus Kunststoff 1 Standardkonus aus Stahl 1 doppelseitiger Konus 1 Konusabdeckung 1 Senkkopfschraube 20 Spreizhülsen 1 Aluminium-Aufbewahrungskassette.

€931.99*

Kurze Haltebacken für MicroBlock®

Reduziert die Höhe des GRS MicroBlock® bzw. des MicroBlock XL um 9,5 mm. • Perfekt für den Einsatz mit dem Ringhaltersatz «Alexandre» und dem ID Ringhalter • Gleiche Stiftlöcher und Gewinde wie bei den Standard MicroBlock Haltebacken • Inklusive Gewindemutter • Perfekt für den Einsatz mit dem Mikroskop Kompatibel mit allen GRS MicroBlocks® (341715 nicht im Lieferumfang enthalten)

€226.99*

MicroBlock® Gummisockel

Der MicroBlock® Gummisockel sorgt für zusätzliche Rutschfestigkeit und Kontrolle. Kompatibel mit allen GRS MicroBlocks (341715 separat erhältlich).

€27.99*

Engraver's cushion holder for BenchMate GRS

Angular bracket for engraver's cushions. For insertion into the dovetail BenchMate suspension bracket. Suitable for attachment of accessories in an adaptedheight up to 101.6 mm max. Adjustable in steps of 12.7 mm.

€138.99*

Ring stick for BenchMate GRS

By exchanging the plastic sleeves, rings of different diameters can be held from the inside. The ring is clamped in quickly and easily with a cone and an Allen wrench. Includes seven interchangeable plastic inserts dia. 14 - 15.5 - 17 - 18.5 - 19.5 - 20.5 - 22 mm.

€251.99*

Replacements

Spannbacke Standard für Gravierkugel Microblock

Teil Nr. 7 laut Teileliste

€125.99*

Spannbacke gravierfähig für Gravierkugel MicroBlock

€145.99*

Gewindestange für Gravierkugel Microblock

Teil Nr. 11 laut Teileliste

€62.99*

Austauschsatz Schraube/Bolzen für Gravierkugel Microblock

Im Lieferumfang enthalten: Spannbacken-Schraube Mutterbolzen Linksgewinde Mutterbolzen Rechtsgewinde O-Ring Fett Tube

€139.99*

Sechskantchlüssel 5mm mit Griff für Gravoierkuagel MicroBlock

Teil Nr. 23 laut Teileliste

€28.99*

Mutterbolzen Rechtsgewinde für Gravierkugel MicroBlock

Teil Nr. 10 laut Teileliste

€22.99*