-
All Categories
-
Clock Movements
-
Watchmaker Tool & Workshop Need
-
Clocks and watches
-
Crafting and designing
-
Batteries
-
Jewelry parts
-
Nose piercing
-
Watch spare parts
-
Clock parts
-
Watch glasses
-
Watch movements by brands
-
Watch Straps and accessories
-
Wristwatches and pocket watches
-
Alarm clocks and large clocks
-
Tools/supplies
-
Drilling, polishing, grinding
-
Turning
-
Facilities, compressed air and vacuum
- Goldsmith special tools/GRS
-
Small tools
-
Soldering, melting, casting, welding
-
Measuring and testing
-
Surface treatment
-
Clean, dry, turning, sawing
-
Watchmaker tools
-
Sales and workshop tools
-
Drilling, polishing, grinding
-
3Dmensionals
-
Weather instruments
-
Craft & creative
-
Expert knowledge & literature
-
Household, security, outdoor
-
Special items
-
Catalogues
-
NEUHEITEN
-
Clock Movements
Product number:
310735
Product information "GRS Easy Graver 120° toolholder"
This mount is used only to produce gravers with 120°.
Many inexperienced engravers have trouble achieving consistently accurate sharpening results.
Professionals want to save the time when sharpening in order to devote more of their productivity at the workbench.
The EasyGraver toolholder is based on standard geometries that have been used for many years by hundreds of engraving artists and jewellery manufacturers all over the world according to our observations.
Please note that the vertical
grabpole (#003-502) IS NOT INCLUDED
and must be purchased separately.
The pole positions #1 and #2 are intended for aligning or reshaping the graver base for a V-tip of 120 degrees.
The lateral positions #3 and #4 are then used for sharpening a parallel relief grinding.
After sharpening the relief grindings, the user can sharpen point angle in the centre pole position and easily adjust the length of the relief grindings.
Many inexperienced engravers have trouble achieving consistently accurate sharpening results.
Professionals want to save the time when sharpening in order to devote more of their productivity at the workbench.
The EasyGraver toolholder is based on standard geometries that have been used for many years by hundreds of engraving artists and jewellery manufacturers all over the world according to our observations.
Please note that the vertical
grabpole (#003-502) IS NOT INCLUDED
and must be purchased separately.
The pole positions #1 and #2 are intended for aligning or reshaping the graver base for a V-tip of 120 degrees.
The lateral positions #3 and #4 are then used for sharpening a parallel relief grinding.
After sharpening the relief grindings, the user can sharpen point angle in the centre pole position and easily adjust the length of the relief grindings.
| Article name: | Easy Graver 120° |
|---|---|
| Brand: | GRS |
| Catalogue item No.: | 003-700 |