Mail: service@selva.de Phone: +49 (0) 7425 930 100
Go to homepage
icon-warenkorb Created with Sketch. €0.00
New SALE %

Jura-tools

Jura by GRS bietet eine der innovativsten Lösungen für das Halten von Werkstücken in der Schmuckindustrie.

Bei der 3X-Serie wird durch die Schaffung eines mehrachsigen Ansatzes Ihr Werkstück nie wieder aus der Mitte geraten. Dieses System nutzt die Bewegung in alle Richtungen, um einen uneingeschränkten Zugang zu gewährleisten.  Das Basic Set nutzt die Jura Master Jaws und Quick Change Spannvorrichtungen, um ein System zu schaffen, das für ultimative Arbeitseffizienz entwickelt wurde. Der QC-Ansatz ermöglicht einen sekundenschnellen Wechsel der Halterungen.

 

Effizientes, Zeit- und Kosten-sparendes Arbeit mit Jura Werkzeugen by GRS!

Jura 3X Workholding
Jura QC Werkzeughalter-Sets
Jura QC Spannvorrichtungen
Jura Organisatoren
Jura's must have
10 mm Tensioning Device with Cylinder Top
10 mm Tensioning Device with Cylinder Top
Good for clamping small work pieces such as earrings. This fixture is compatible with the Jura by GRS Classic QC Workholding System and the 3X Line. This item is included in the Complete Set and Advanced Set.

€155.99*
20 mm Straight Top
20 mm Straight Top
This mid-sized clamp creates ideal workholding for multi-sided setting. This fixture is compatible with the Jura by GRS Classic QC Workholding System and the 3X Line. This item is included in the Complete Set and Advanced Set.

€174.99*
20 mm Tensioning Device with Round Top
20 mm Tensioning Device with Round Top
Designed to hold rings, round pendants, and more. This fixture is compatible with the Jura by GRS Classic QC Workholding System and the 3X Line. This item is included in the Complete Set and Advanced Set.

€166.99*
3X Flat Clamps with Pin Holes
3X Flat Clamps with Pin Holes
This fixture holds flat plates or flat, round pendants. Accommodate larger pieces by placing pins in the holes. This fixture is compatible with the Jura by GRS Classic QC Workholding System and the 3X Line.

€209.99*
40 mm Tensioning Device With Straight Top
40 mm Tensioning Device With Straight Top
This wide clamp creates ideal workholding for multi-sided setting. This fixture is compatible with the Jura by GRS Classic QC Workholding System and the 3X Line. This item is included in the Complete Set and Advanced Set.

€214.99*
6 mm Tensioning Device with Cylinder Top
6 mm Tensioning Device with Cylinder Top
Ideal for making tools, holding small workpieces, and more. This fixture is compatible with the Jura by GRS Classic QC Workholding System and the 3X Line. This item is included in the Complete Set and Advanced Set.

€155.99*
Adapter for GRS® Standard Block
Adapter for GRS® Standard Block
Utilize the entire Jura QC Workholding System in your GRS Standard Block. Quickly drops into the pin holes of your Standard Block. Compatible with Classic QC Workholding Fixtures.

€372.99*
Digital Divider
Digital Divider
This compact-style digital divider is great for precision layout. The hardened steel jaws can be sharpened to your desired points.

€237.99*
Drill Chuck Holder
Drill Chuck Holder
Use this vertical chuck to custom-make tools such as beading tools, drills, and more. Also great for holding work such as earrings. This fixture is compatible with the Jura by GRS Classic QC Workholding System and the 3X Line. This item is included in the Advanced Set.

€115.99*
Jura 3X 4-Jaw Chuck
Jura 3X 4-Jaw Chuck
This robust and versatile fixture is the ultimate holding option for uniquely-shaped items. Four independent jaws can be adjusted in a variety of different configurations to hold your work securely. This fixture is compatible with the Jura by GRS 3X Line.

€701.99*
Jura 3x Aluminum Adapter Block
Jura 3x Aluminum Adapter Block
Turn any 3X workholding fixture into a tool that can be used in standard vise jaws. The Aluminum Adapter Block can be attached using the threads on the bottom of the 3X fixtures, allowing them to be clamped in any vise.

€77.99*
Jura 3X Hobo Nickel Holder
Jura 3X Hobo Nickel Holder
The Hobo Nickle Holder uses a unique brass collet system that has been designed specifically for the most popular coins artists work with. The outer portion of the vise provides a sturdy clamping system to reduce vibration. By attaching the orbital ball to the bottom, the artist gains the ability to tilt the fixture while being able to rotate their vise, keeping the working area centered under the microscope.

€598.99*
Jura 3X Line Starter Set 
Jura 3X Line Starter Set 
The 3X Starter Set is one of the most innovative workholding solutions to hit the jewelry industry. By creating a multi-axis approach, your work will never be out of center again. This system utilizes movement in every direction to ensure unlimited access. For setters using a microscope, this product will save time and frustration. The set comes with the 3X Holder which allows the user to pivot and manipulate the ring to the exact position desired. The orbital ball creates additional versatility, not just for ring holding, but can be used with other attachments in the 3X Line. Robust brass collets will ensure sturdy holding of rings. Jura Stackable Bases will keep work at a proper height depending on the attachment. XY Ball, Set of Jura Stackable Bases, 5 mm Hex Key, 3X Holder, 11 Brass Collets, 10 Plastic Collets, M6 Screw, Radius Divider, Orbital Jaws and Orbital Ball.

€1,937.99*
Jura 3X Mini Chuck
Jura 3X Mini Chuck
Remain efficient during the work process with this great little drop-in attachment for making tools or holding work chuck-style. This fixture is compatible with the Jura by GRS 3X Line.

€57.99*
Jura 3X Pin Vise
Jura 3X Pin Vise
This pin vise was designed to be used with the 3X Orbital Holder (included with the 3X Starter Set). By using the traditional design of a pin vise and adding the orbital approach, the user can clamp their work and keep it in center while also being able to tilt the pin vise. This fixture is compatible with the Jura by GRS 3X Line.

€503.99*
Jura 3x Replacement Orbital
Jura 3x Replacement Orbital
Avoid time spent switching the Orbital Balls from one fixture to another by adding these replacement balls to fixtures you use regularly in the Orbital Jaws.

€19.99*
Jura 3x Shellac Tubes
Jura 3x Shellac Tubes
Shellac Tubes drop into the 3X Master clamps to hold small pieces such as earrings, pendants, or other items. The ability to use two shellac tubes at a time allows for greater efficiency. Available in four sizes to save time heating. This fixture is compatible with the Jura by GRS 3X Line. (1) 39 mm tube, (2) 20 mm tubes, (2) 15 mm tubes, (2) 11 mm tubes

€128.99*
Jura 3X Thermo-Loc® Clamps
Jura 3X Thermo-Loc® Clamps
Utilize the 3X System while holding odd-shaped pieces. Designed to help keep Thermo-Loc in place and your work secure.

€134.99*
Jura Gravierkugelsockel-Set 3 Stück stapelbar
Jura Gravierkugelsockel-Set 3 Stück stapelbar
Ein Satz von drei Sockeln hält die Arbeit auf einer gleichbleibenden Höhe, je nachdem, welche Jura-Vorrichtung Sie verwenden. Sie sind stapelbar und stabil. Dieses Set mit 3 stapelbaren Sockeln ist im Lieferumfang des 3X Starter Set enthalten

€119.99*
Jura Handspannfutter 10er-Satz
Jura Handspannfutter 10er-Satz
Die Jura-Handspannfutter eignen sich hervorragend für die Verwendung mit Korneisen, Polierwerkzeugen und mehr. Die halbrunden Griffe bieten einen hervorragenden Bezugspunkt bei der Verwendung von Korneisen. Die runden Griffe sind ideal zum Polieren und Körnen. Dieser Satz ist im Erweiterten Satz enthalten.

€386.99*
Jura Horizontaler Ringspanner
Jura Horizontaler Ringspanner
Ringhalter zur äußeren Fixierung von Ringen, um diese mühelos von innen Bearbeiten zu können, um 360° drehbar.

€199.99*
Jura Innensechskantschlüssel 5 mm
Jura Innensechskantschlüssel 5 mm
Dieser grosse 5 mm Inbusschlüssel mit Griff eignet sich hervorragend, um eine zusätzliche Hebelwirkung beim Festziehen der Schraubstockbacken zu erzielen. Er ist in den Sets Basic, Complete und Advanced mit MicroBlock oder MicroBlock XL enthalten.

€43.99*
Jura Keramische Anreissnadel & Hartmetallspitze
Jura Keramische Anreissnadel & Hartmetallspitze
Dieser Werkzeugsatz eignet sich hervorragend für das Layout und die Positionierung von Steinen. Die keramische Reissnadel verfängt sich nicht wie traditionelle Ritzgeräte auf Metall. Die Hartmetallspitze kann vielseitig eingesetzt werden, z.B. zum Bewegen oder Justieren von Steinen. Diese Elemente sind im Satz für Fortgeschrittene enthalten.

€88.99*
Jura Keramische Anreissnadel einzeln
Jura Keramische Anreissnadel einzeln
Die keramische Reissnadel ist für präzises Layout nützlich und verfängt sich nicht wie traditionelle Ritznadeln auf Metall. Das Ende im Spannfutter-Stil macht das Wechseln der keramischen Spitzen einfacher. (Abbildung zeig das komplette Set)

€58.99*
This website uses cookies to ensure the best experience possible. More information...