GRS handpiece QC 901 with 6 graver holder inserts

€697.99*

Available, delivery time: 2-3 days

STK

Product number: 226254

Product information "GRS handpiece QC 901 with 6 graver holder inserts"

Includes 6 QC toolholders. This handpiece has a very large impact strength range, which can be controlled very finely. The comfortable, compact handpiece has an adjustable side hose connection and meets most needs for engraving and gemstone setting. Particularly suited for fine engravings, deep relief work, and almost all stone setting work, especially for pavé settings. Made of fully heat-treated stainless steel.

Article name:	QC 901
Brand:	GRS
Catalogue item No.:	004-901
External dimension length:	66.00
Gross weight grams:	200.00

Accessoires (required)

GRS QC toolholder for graver handle, flat, content: 3 pieces

For traditional QC gravers with flat handle. Drilled hole 3.4 mm.

€48.99*

GRS QC toolholder, traditional, extra long, 3 pieces

Extends tools by 12.7 mm

€81.99*

GRS QC toolholder, traditional, extra long, 10 pieces

Extra long QC toolholder. Extends tools by 12.7 mm. 10-pack

€274.99*

GRS QC toolholder for graver handle, flat, content: 10 pieces

For traditional QC gravers with flat handle. Drilled hole 3.4 mm.

€164.99*

GRS QC toolholder blank, contents 1 pc.

With centre hole. Blank for you to customise for special tools

€19.99*

GRS QC toolholder blank, contents 10 pcs.

With centre hole. Blank for you to customise for special tools.

€164.99*

GRS QC toolholder for graver handle, flat, content: 1 pieces

For traditional QC gravers with flat handle. Drilled hole 3.4 mm.

€18.99*

GRS QC toolholder for shaft dia. 2.34, content: 10 pieces

€146.99*

GRS QC toolholder for shaft dia. 2.34, content: 3 pieces

€44.99*

GRS QC toolholder for shaft dia. 2.34, content: 1 piece

€16.99*

GRS QC toolholder, traditional, extra long, 1 piece

Extends tools by 12.7 mm

€29.99*

Accessoires (optional)

GRS handpiece top part Airtact, aluminium, black

These kits are equipped with a special Airtact compatible knob, replacing the standard handpiece knob. A special rubber pad for the heel of the hand "senses" the required force and thus enables the Airtact to adjust the power automatically. One knob each with rubber pad, type E #6, #8, #10 (#044-944) and three rubber pads type D #1 are included.

€139.99*

GRS graver holder inserts set with dampers, Contents: 3 pcs

Change the impact strength of GRS handpieces by simply inserting a tool or graver into this new QC toolholder with damper. The special plastic cap attached at the end of the QC toolholder ensures that the force is transmitted from the handpiece to the tool more gently, softening the impact. Fine engravings and shades are easier to control, stress on the tool and hand vibrations are reduced. The difference is small, but pleasant for fine work. The QC toolholder with damper is compatible only with the GRS handpieces Monarch, 901, or Magnum. Contents 3 pcs

€91.99*

Graphite dry powder

Recommended for all compressed air-powered GRS hand pieces. Reduces friction without oily residues.

€16.99*

GRS handpiece top part Airtact 901, stainless steel

These kits are equipped with a special Airtact-compatible knob, replacing the standard handpiece knob. A special rubber pad for the heel of the hand "senses" the required force and thus enables the Airtact to adjust the power automatically. One knob each with rubber pad, type E #6, #8, #10 (#044-944) and three rubber pads type D #1 are included.

€166.99*