Dust and scratch box
Dust catcher made of sheet steel
€121.99*
Galvanised, with palm rest. Double dust collection rib treads, can be opened from behind for cleaning. Dust drawer on side for easy cleaning.
Dust collecting hood made of sheet steel
€823.99*
With non-reflective 7 W interior lighting (SKU 4141157) and movable shield. For connection to suction ASG2 SKU 4 550 067.
Extension for grinding motor Moderma BS
€59.99*
Used to extend the motor shaft to allow the scrubbing brushes to run under the water jet of the scraping box.
Foredom Lighted work chamber
€748.99*
Foredom’s Lighted Work Chamber is a great addition for dental and other lab technicians, jewelers, carvers, and fabricators working with small workpieces. It offers excellent visibility and keeps dust and debris contained when grinding, sanding, polishing and drilling workpieces that fit in your hand. The compressed air nozzle swivels and air flow can be adjusted from low to high and directed to funnel dust and debris away from the workpiece, through the back of the chamber and into Foredom’s New Dust Collector or other dust collection system.
Features:
LED Light tilts to focus where needed.
Compressed Air Nozzle has variable flow of air up to 90 PSI or 6 Bars and pivots to direct air on the workpiece, funneling dust and shavings away.
Vacuum Port fits a 2-1/4″ diameter hose for connection to a dust collector, shop vacuum or other device. A 2-pin style plug outlet for dust collectors with a remote on/off switch is located in the back.
Power Switch on the front for the light can also remotely activate a separate dust collector.
Acrylic Shields hinged and secured with screws contain dust and debris.
2-1/2x Magnifier is 5" in diameter and has 10x insert for closer work. It flips up, out of the way when not needed.
Magnetic Work Rest Cylindrical rest has strong magnet at bottom with felt cover. Top has 1-1/2″ dia x 3/16″ thick rubber insert for protecting work pieces. Comes with 2 additional rubber inserts. 1-5/8″ dia x 1-5/8″ high overall dimensions.
Padded Wrist Rests on both sides.
Universal Voltage 230V (controls LED Light and Remote Switch)
Dimensions:
Outer: 11-1/2″h x 11″w x 10″d
Inner: 8″h x 10-1/4″w x 6-1/2″
Weight: 11 lb
Shipping Weight: 14-1/4 lb
Scraping box
€403.99*
Drip box with starting tap. Water collecting box with splash shield. When using scraping boxes, use only engines with rotation speed of up to 700 RPM (e.g., grinding motor Moderma SKU 4550022).
Suction ASG 2
€1,867.99*
Device with powerful suction and special sound insulation for retrofitting existing polishing motors. Preferably used as under-table unit. This suction motor can be combined with dust catcher hood 4 550 068. Intake nozzle dia. 76 mm for spiral hose. 230 V / 50 Hz. 250 Watt.