-
All Categories
-
Clock Movements
-
Watchmaker Tool & Workshop Need
-
Clocks and watches
-
Crafting and designing
-
Batteries
-
Jewelry parts
-
Nose piercing
-
Watch spare parts
-
Clock parts
-
Watch glasses
-
Watch movements by brands
-
Watch Straps and accessories
-
Wristwatches and pocket watches
-
Alarm clocks and large clocks
- Tools/supplies
-
3Dmensionals
-
Weather instruments
-
Craft & creative
-
Expert knowledge & literature
-
Household, security, outdoor
-
Special items
-
Catalogues
-
Clock Movements
Product number:
322263
Product information "Drying box Flume"
This drying box is ideally suited for spot free drying of all kinds of metals. Even soft metals will not scratch. The drying unit uses very little power and is designed for continuous drying.
Installation:
After switching the unit on, wait approx. 1 minute for the device to warm up.
Fill the drying box 3/4 with resin-free sawdust, for example.
After approx. 10 minutes, the sawdust will be warm and you can add the articles to be dried to the unit or cover them with sawdust.
Once the object is dry, all sawdust will simply fall off.
To avoid spots on the surface, make sure the item has been previously rinsed in clean water. (In regions with elevated water hardness, deionised water is recommended.)
Installation:
After switching the unit on, wait approx. 1 minute for the device to warm up.
Fill the drying box 3/4 with resin-free sawdust, for example.
After approx. 10 minutes, the sawdust will be warm and you can add the articles to be dried to the unit or cover them with sawdust.
Once the object is dry, all sawdust will simply fall off.
To avoid spots on the surface, make sure the item has been previously rinsed in clean water. (In regions with elevated water hardness, deionised water is recommended.)
| Article name: | Drying box Flume |
|---|---|
| Dimensions height mm: | 145.00 |
| Dimensions Ø mm: | 250.000 |
| Gross weight grams: | 0.00 |
| Volt/Hz: | 230 / 50 |
| Watt: | 60 |
